Install and configure elasticsearch logstash kibana and filebeat

All the components Elasticsearch Logstash Kibana Filebeat have same version 8.13.3

All the components are installed on separate ec2 instances and respective ports are opened to receive traffic (5044 ,5601,9200 etc....)

Elasticsearch Installation :

Reference article : Reference https://www.elastic.co/guide/en/elastic-stack/8.13/installing-stack-demo-self.html#install-stack-self-prereqs

Log in to the host where you’d like to set up your first Elasticsearch node.
Create a working directory for the installation package:

mkdir elastic-install-files
cd elastic-install-files

Download the Elasticsearch RPM and checksum file from the Elastic Artifact Registry. You can find details about these steps in the section https://www.elastic.co/guide/en/elasticsearch/reference/8.13/rpm.html#install-rpm .

wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.13.3-x86_64.rpm
wget https://artifacts.elastic.co/downloads/elasticsearch/elasticsearch-8.13.3-x86_64.rpm.sha512

Run the Elasticsearch install command:

sudo rpm --install elasticsearch-8.13.3-x86_64.rpm

The Elasticsearch install process enables certain security features by default, including the following:

Authentication and authorization are enabled, including a built-in elastic superuser account.
Certificates and keys for TLS are generated for the transport and HTTP layer, and TLS is enabled and configured with these keys and certificates.

sudo systemctl daemon-reload
sudo systemctl enable elasticsearch.service

Configure the first Elasticsearch node for connectivity

In a terminal, run the ifconfig command and copy the value for the host inet IP address (for example, 10.128.0.84). You’ll need this value later.
Open the Elasticsearch configuration file in a text editor, such as vim:

sudo vim /etc/elasticsearch/elasticsearch.yml

# Use a descriptive name for your cluster:
#
cluster.name: elasticsearch-demo

# By default Elasticsearch is only accessible on localhost. Set a different
# address here to expose this node on the network:
#
network.host: 172.31.0.29

Elasticsearch needs to be enabled to listen for connections from other, external hosts.

Uncomment the line #transport.host: 0.0.0.0. The 0.0.0.0 setting enables Elasticsearch to listen for connections on all available network interfaces. Note that in a production environment you might want to restrict this by setting this value to match the value set for network.host.

# Allow HTTP API connections from anywhere
# Connections are encrypted and require user authentication
http.host: 0.0.0.0

Now, it’s time to start the Elasticsearch service

sudo systemctl start elasticsearch.service

Make sure that Elasticsearch is running properly , but before that you will need to get password for elasticsearch

/usr/share/elasticsearch/bin/elasticsearch-reset-password -u elastic

after that run the following command

sudo curl --cacert /etc/elasticsearch/certs/http_ca.crt -u elastic:$ELASTIC_PASSWORD https://localhost:9200

You will get following output

{
  "name" : "Cp9oae6",
  "cluster_name" : "elasticsearch",
  "cluster_uuid" : "AT69_C_DTp-1qgIJlatQqA",
  "version" : {
    "number" : "{version_qualified}",
    "build_type" : "{build_type}",
    "build_hash" : "f27399d",
    "build_flavor" : "default",
    "build_date" : "2016-03-30T09:51:41.449Z",
    "build_snapshot" : false,
    "lucene_version" : "{lucene_version}",
    "minimum_wire_compatibility_version" : "1.2.3",
    "minimum_index_compatibility_version" : "1.2.3"
  },
  "tagline" : "You Know, for Search"
}

Install Kibana

mkdir kibana-install-files
cd kibana-install-files

Download the Kibana RPM and checksum file from the Elastic website.

wget https://artifacts.elastic.co/downloads/kibana/kibana-8.13.3-x86_64.rpm
wget https://artifacts.elastic.co/downloads/kibana/kibana-8.13.3-x86_64.rpm.sha512

Run the Kibana install command:

sudo rpm --install kibana-8.13.3-x86_64.rpm

As with each additional Elasticsearch node that you added, to enable this Kibana instance to connect to the first Elasticsearch node, you need to configure an enrollment token.
Return to your terminal shell into the first Elasticsearch node.
Run the elasticsearch-create-enrollment-token command with the -s kibana option to generate a Kibana enrollment token:

sudo /usr/share/elasticsearch/bin/elasticsearch-create-enrollment-token -s kibana

Copy the generated enrollment token from the command output.
Back on the Kibana host, run the following two commands to enable Kibana to run as a service using systemd, enabling Kibana to start automatically when the host system reboots.

sudo systemctl daemon-reload
sudo systemctl enable kibana.service

In a terminal, run the ifconfig command and copy the value for the host inet IP address.
Open the Kibana configuration file for editing:

sudo vim /etc/kibana/kibana.yml

# Specifies the address to which the Kibana server will bind. IP addresses and host names are both valid values.
# The default is 'localhost', which usually means remote machines will not be able to connect.
# To allow connections from remote users, set this parameter to a non-loopback address.
#server.host: "localhost"
server.host: 172.31.0.139

sudo systemctl status kibana -l

In the status command output, a URL is shown with:
- A host address to access Kibana
- A six digit verification code
  
  For example:

Kibana has not been configured.
Go to http://10.128.0.28:5601/?code=<code> to get started.

Open a web browser to the external IP address of the Kibana host machine, for example: http://<kibana-host-address>:5601.

It can take a minute or two for Kibana to start up, so refresh the page if you don’t see a prompt right away.
When Kibana starts you’re prompted to provide an enrollment token. Paste in the Kibana enrollment token that you generated earlier.
Click Configure Elastic.
If you’re prompted to provide a verification code, copy and paste in the six digit code that was returned by the status command. Then, wait for the setup to complete.
When you see the Welcome to Elastic page, provide the elastic as the username and provide the password that you copied in Step 1, from the install command output when you set up your first Elasticsearch node.
Click Log in.

Logstash Installation

Download and install the public signing key:

sudo rpm --import https://artifacts.elastic.co/GPG-KEY-elasticsearch

Add the following in your /etc/yum.repos.d/ directory in a file with a .repo suffix, for example logstash.repo

[logstash-8.x]
name=Elastic repository for 8.x packages
baseurl=https://artifacts.elastic.co/packages/8.x/yum
gpgcheck=1
gpgkey=https://artifacts.elastic.co/GPG-KEY-elasticsearch
enabled=1
autorefresh=1
type=rpm-md

sudo yum install logstash

Filebeat Installation :

Install Filebeat on all the servers you want to monitor.

To download and install Filebeat, use the commands that work with your system:

curl -L -O https://artifacts.elastic.co/downloads/beats/filebeat/filebeat-8.13.3-x86_64.rpm
sudo rpm -vi filebeat-8.13.3-x86_64.rpm

Identify the modules you need to enable. To see a list of available modules, run:

filebeat modules list

Now we want to transfer the logs from filebeat to logstash

sudo service filebeat start

Check if logstash is reachable from filebeat

[root@ip-172-31-0-57 ~]# telnet 172.31.0.196 5044
Trying 172.31.0.196...
Connected to 172.31.0.196.
Escape character is '^]'.

Setup following configuration in filebeat in /etc/filebeat/filebeat.yml

# ============================== Filebeat inputs ===============================

filebeat.inputs:

# Each - is an input. Most options can be set at the input level, so
# you can use different inputs for various configurations.
# Below are the input-specific configurations.

# filestream is an input for collecting log messages from files.
- type: filestream

  # Unique ID among all inputs, an ID is required.
  id: my-filestream-id

  # Change to true to enable this input configuration.
  enabled: true

  # Paths that should be crawled and fetched. Glob based paths.
  paths:
    - /var/log/*.log
    #- c:\programdata\elasticsearch\logs\*

and this one as well

# ---------------------------- Elasticsearch Output ----------------------------
#output.elasticsearch:
  # Array of hosts to connect to.
  # hosts: ["3.89.91.147:9200"]

  # Performance preset - one of "balanced", "throughput", "scale",
  # "latency", or "custom".
  # preset: balanced

  # Protocol - either `http` (default) or `https`.
  # protocol: "http"

  # Authentication credentials - either API key or username/password.
  #api_key: "id:api_key"
  # username: "elastic"
  # password: "LZX6TyiRu6IiLPS5D8c4"

# ------------------------------ Logstash Output -------------------------------
output.logstash:
  # The Logstash hosts
  hosts: ["172.31.0.196:5044"]

  # Optional SSL. By default is off.
  # List of root certificates for HTTPS server verifications
  #ssl.certificate_authorities: ["/etc/pki/root/ca.pem"]

  # Certificate for SSL client authentication
  #ssl.certificate: "/etc/pki/client/cert.pem"

  # Client Certificate Key
  #ssl.key: "/etc/pki/client/cert.key"

The logs are moving from filebeat to logstash on port 5044 so elasticsearch will be commented

check errors in /var/log/filebeat or in /var/log/messages

As refered in point 4 you must check connectivity

Now once the filebeat is setup the logstash server must be setup to accept logs from filebeat server
On logstash server check do the following changes in /etc/logstash/conf.d/logstash.conf file as follows

input {
  beats {
    port => 5044
  }
}

output {
  if [@metadata][pipeline] {
    elasticsearch {
      hosts => ["https://172.31.0.29:9200"]
      index => "%{[@metadata][beat]}-%{[@metadata][version]}"
      user => "elastic"
      password => "LZX6TyiRu6IiLPS5D8c4"
      ssl_certificate_verification => false
    }
  } else {
    elasticsearch {
      hosts => ["https://172.31.0.29:9200"]
      index => "%{[@metadata][beat]}-%{[@metadata][version]}"
      user => "elastic"
      password => "LZX6TyiRu6IiLPS5D8c4"
      ssl_certificate_verification => false
    }
  }
}

While doing these changes and restarting the logstash server you me face following errors in file /var/log/messages

If systemctl restart logstash command is stuck then get the logstash process id and kill the process

In /var/log/messages you me see following error

  {"log.level":"error","@timestamp":"2024-05-03T08:31:43.922Z","log.logger":"esclientleg","log.origin":{"function":"github.com/elastic/beats/v7/libbeat/esleg/eslegclient.NewConnectedClient","file.name":"eslegclient/connection.go","file.line":252},"message":"error connecting to Elasticsearch at https://44.204.25.156:9200: Get \"https://44.204.25.156:9200\": x509: certificate signed by unknown authority","service.name":"filebeat","ecs.version":"1.6.0"}
  {"log.level":"error","@timestamp":"2024-05-03T08:31:43.922Z","log.origin":{"function":"github.com/elastic/beats/v7/libbeat/cmd/instance.handleError","file.name":"instance/beat.go","file.line":1340},"message":"Exiting: couldn't connect to any of the configured Elasticsearch hosts. Errors: [error connecting to Elasticsearch at https://44.204.25.156:9200: Get \"https://44.204.25.156:9200\": x509: certificate signed by unknown authority]","service.name":"filebeat","ecs.version":"1.6.0"}

After setting proper parameters in /etc/logstash/conf.d/logstash.conf

Due to version mismatch between components like Logstash Kibana Filebeat installation you me get following error

[2024-05-03T09:37:32,917][INFO ][org.logstash.beats.Server][main][8c5f2ea2816e38114261fe0663fd260f47d161ea67b786d5cb59066fc193a38e] Starting server on port: 5044
[2024-05-03T09:52:32,751][INFO ][org.logstash.beats.BeatsHandler][main][8c5f2ea2816e38114261fe0663fd260f47d161ea67b786d5cb59066fc193a38e] [local: 172.31.0.150:5044, remote: 3.87.62.81:52812] Handling exception: io.netty.handler.codec.DecoderException: org.logstash.beats.InvalidFrameProtocolException: Invalid version of beats protocol: -1 (caused by: org.logstash.beats.InvalidFrameProtocolException: Invalid version of beats protocol: -1)
[2024-05-03T09:52:32,753][WARN ][io.netty.channel.DefaultChannelPipeline][main][8c5f2ea2816e38114261fe0663fd260f47d161ea67b786d5cb59066fc193a38e] An exceptionCaught() event was fired, and it reached at the tail of the pipeline. It usually means the last handler in the pipeline did not handle the exception.
io.netty.handler.codec.DecoderException: org.logstash.beats.InvalidFrameProtocolException: Invalid version of beats protocol: -1
        at io.netty.handler.codec.ByteToMessageDecoder.callDecode(ByteToMessageDecoder.java:500) ~[netty-codec-4.1.109.Final.jar:4.1.109.Final]
        at io.netty.handler.codec.ByteToMessageDecoder.channelRead(ByteToMessageDecoder.java:290) ~[netty-codec-4.1.109.Final.jar:4.1.109.Final]
        at io.netty.channel.AbstractChannelHandlerContext.invokeChannelRead(AbstractChannelHandlerContext.java:444) ~[netty-transport-4.1.109.Final.jar:4.1.109.Final]

Once we resolve all errors we will get following messages

less /var/log/messages

May  5 14:06:03 ip-172-31-0-196 logstash: [2024-05-05T14:06:03,859][INFO ][logstash.javapipeline    ][main] Starting pipeline {:pipeline_id=>"main", "pipeline.workers"=>2, "pipeline.batch.size"=>125, "pipeline.batch.delay"=>50, "pipeline.max_inflight"=>250, "pipeline.sources"=>["/etc/logstash/conf.d/logstash.conf"], :thread=>"#<Thread:0x2b7ab562 /usr/share/logstash/logstash-core/lib/logstash/java_pipeline.rb:134 run>"}
May  5 14:06:04 ip-172-31-0-196 logstash: [2024-05-05T14:06:04,599][INFO ][logstash.javapipeline    ][main] Pipeline Java execution initialization time {"seconds"=>0.74}
May  5 14:06:04 ip-172-31-0-196 logstash: [2024-05-05T14:06:04,607][INFO ][logstash.inputs.beats    ][main] Starting input listener {:address=>"0.0.0.0:5044"}
May  5 14:06:04 ip-172-31-0-196 logstash: [2024-05-05T14:06:04,618][INFO ][logstash.javapipeline    ][main] Pipeline started {"pipeline.id"=>"main"}
May  5 14:06:04 ip-172-31-0-196 logstash: [2024-05-05T14:06:04,641][INFO ][logstash.agent           ] Pipelines running {:count=>1, :running_pipelines=>[:main], :non_running_pipelines=>[]}
May  5 14:06:04 ip-172-31-0-196 logstash: [2024-05-05T14:06:04,708][INFO ][org.logstash.beats.Server][main][dd54c7549f35fae436fe9a95be572022d18819c0edd32ee7226d4a24089587d2] Starting server on port: 5044

Under "Stack Management" ---> "Index Management" we will get our index

Now setup the index and we will get following in kibana

Elasticsearch Logstash Kibana Filebeat installation and integration

Elasticsearch Installation :

Configure the first Elasticsearch node for connectivity

Install Kibana

Logstash Installation

Filebeat Installation :